Multi-Axis Systems with IPOS Drives

Multi-Axis Motion Systems provide compact, ready-to-run solutions for multi-axis applications.

  • The iPOS360x SX allows you to create compact, flexible 4-axis systems with Ethernet or CAN bus communication using iPOS3602 or iPOS3604 drives.
  • The iPOS360x SY expands the number to 6 axes and, alternatively to the CAN bus, offers the option of a direct EtherCAT interface to any of the drives in the system.
  • The iPOS4808 SY represents an extremely compact 4-axis EtherCAT system based on the powerful iPOS4808 MY intelligent servo & stepper drive.
  • 4-axis motion system using iPOS3602 or iPOS3604
  • For brushless, DC brush and step motors
  • 12-36 V logic / motor power supply
  • Up to 4 A continuous, 10 A peak per drive
  • CAN communication between axes
  • RS-232 and Ethernet for setup
Amount: from 47.80 CHF
  • 6-axis motion system using iPOS3602 or iPOS3604
  • For brushless, DC brush and step motors
  • 12-36 V logic / motor power supply
  • Up to 4 A continuous, 10 A peak per drive
  • EtherCAT or CAN communication with the host
  • RS-232 for setup
Amount: from 28.00 CHF
  • 4-axis motion system using iPOS4808 MY
  • For brushless, DC brush and step motors
  • 12-50 V motor supply, 12-36 V logic supply
  • 8 A continuous, 20 A peak current per axis
  • EtherCAT communication (CoE protocol)
  • RS-232 for setup
Amount: from 339.25 CHF
Copyright MAXXmarketing Webdesigner GmbH
   

 

TECHNOSOFT SA, av. des Alpes 20, CH-2000 Neuchâtel, Switzerland. 
Website developed by Adsoft Solutions.