iPOS2401 Intelligent Drives – 24 W

The iPOS2401 intelligent drives are based on a new design concept that has resulted in cost-effective, compact, modular solutions. Among the most compact drives existing on the market, they are specially designed to match small motors of powers up to 24 W. Thus, these drives are mostly suited for embarked applications where the drive can be placed near the motor, in compact mechatronic assemblies where space and weight are critical. 

The iPOS2401 integrate all the basic motor control functions and the motion control functionality on a single module. A series of I/O signals, both digital and analog, are available for easy interfacing with the application.

The iPOS2401 drives can be quickly configured and tuned using one of Technosoft software platforms EasySetUp or EasyMotion Studio. EasySetUp is recommended when the motion programming is done exclusively via an external device (a PC / PLC using Technosoft motion libraries, a CANopen or an EtherCAT master), while EasyMotio Studio includes both drive setup and motion programming.

  • Fully digital drive with embedded motion controller
  • For brushless, DC brush and step motors
  • Motor supply / logic supply: 12-24 V
  • Output current: 0.9 A continuous/peak
  • TMLCAN & CANopen
  • Open-frame PCB, horizontal plug-in design
  • Size: 46.5 x 19.2 x 8.5 mm (~ 1.83 x 0.76 x 0.33 in)
Amount: from 200.00 CHF
  • Fully digital drive with embedded motion controller
  • For brushless, DC brush and step motors
  • Motor supply / logic supply: 12-24 V
  • Output current: 0.9 A continuous/peak
  • EtherCAT communication
  • Open-frame PCB, horizontal plug-in design
  • Size: 50 x 19 x 10 mm (~ 1.97 x 0.75 x 0.39 in)
Amount: 1 000.00 CHF
Copyright MAXXmarketing Webdesigner GmbH
   

 

TECHNOSOFT SA, av. des Alpes 20, CH-2000 Neuchâtel, Switzerland. 
Website developed by Adsoft Solutions.