iPOS3602 Intelligent Servo Drives – 75 W

The iPOS3602 line of drives is based on a new design concept that has resulted in cost-effective, compact and modular solutions for the control of rotary or linear brushless, DC brush, and step motors of powers up to 75 W, and rated voltages of up to 36 V. They integrate all the basic motor control functions and the motion control functionality on a single module. A series of I/O signals, both digital and analogue, are available for easy interfacing with the application. iPOS3602 offer flexible and modular solutions at various levels: plug-in vertical (VX model) or horizontal (MX model) open PCBs that can be either integrated onto the user’s motherboard, or protected by a metal cover and provided with retractable connectors (horizontal with BX model, or vertical with HX model). Using this modular concept, the communication options of iPOS3602 drives (VX & MX models) can be extended using interface extension plug-ins for EtherCAT or Ethernet-to-CAN gateways.

Thanks to the TML instructions set, the iPOS3602 intelligent drives are programmable at user’s level. In simple applications, such a unit can operate as a single-axis motion controller & drive in stand-alone mode, autonomously executing the program that resides in its non-volatile memory. In systems that require a host, an iPOS drive can operate as an intelligent slave – executing motion sequences triggered by input lines or commands received via RS-232 or CAN bus communication – or as a standard EtherCAT or CANopen drive.

The iPOS3602 drives can be quickly configured and tuned using one of Technosoft software platforms EasySetUp or EasyMotion Studio. EasySetUp is recommended when the motion programming is done exclusively via an external device (a PC / PLC using Technosoft motion libraries, a CANopen or an EtherCAT master), while EasyMotio Studio includes both drive setup and motion programming.

  • Fully digital drive with embedded motion controller
  • For brushless, DC brush and step motors
  • Motor supply / logic supply: 12-36 V
  • Output current: 2 A continuous, 3.2 A peak
  • TMLCAN & CANopen (default); EtherCAT (optional)
  • Open-frame PCB, vertical plug-in design
  • Size: 56 x 28.8 x 7.6 mm (~ 2.2 x 1.1 x 0.3 in)
Amount: from 232.80 CHF
  • Fully digital drive with embedded motion controller
  • For brushless, DC brush and step motors
  • Motor supply / logic supply: 12-36 V
  • Output current: 2 A continuous, 3.2 A peak
  • TMLCAN & CANopen (default); EtherCAT (optional)
  • Open-frame PCB, horizontal plug-in design
  • Size: 55 x 26.4 x 13.1 mm (~ 2.2 x 1 x 0.5 in)
Amount: from 267.60 CHF
  • Fully digital drive with embedded motion controller
  • For brushless, DC brush and step motors
  • Motor supply / logic supply: 12-36 V
  • Output current: 2 A continuous, 3.2 A peak
  • TMLCAN & CANopen communication
  • Closed-frame with vertical retractable connectors
  • Size: 73 x 45 x 16 mm (~ 2.87 x 1.77 x 0.63 in)
Amount: from 337.70 CHF
  • Fully digital drive with embedded motion controller
  • For brushless, DC brush and step motors
  • Motor supply / logic supply: 12-36 V
  • Output current: 2 A continuous, 3.2 A peak
  • TMLCAN & CANopen communication
  • Closed-frame design, with retractable connectors
  • Size: 80 x 55 x 16.3 mm (~ 3.15 x 2.17 x 0.64 in)
Amount: from 334.90 CHF
Copyright MAXXmarketing Webdesigner GmbH
   

 

TECHNOSOFT SA, av. des Alpes 20, CH-2000 Neuchâtel, Switzerland. 
Website developed by Adsoft Solutions.