iPOS3604 Intelligent Servo Drives – 144 W

The iPOS3604 line of intelligent drives is based on a new design concept that has resulted in cost-effective, compact and modular solutions for the control of rotary or linear brushless, DC brush, and step motors of powers up to 144 W, and rated voltages of up to 36 V. They integrate all the basic motor control functions and the motion control functionality on a single module. A series of I/O signals, both digital and analogue, are available for easy interfacing with the application. The iPOS3604 series offers flexible and modular solutions at various levels: plug-in vertical (VX model) or horizontal (MX model) open PCBs that can be either integrated onto the user’s motherboard, or protected by a metal cover and provided with retractable connectors (horizontal with BX model, or vertical with HX model). Using this modular concept, the communication options of iPOS3604 drives (VX & MX models) can be extended using interface extension plug-ins for EtherCAT or Ethernet-to-CAN gateways.

Thanks to the TML instructions set, iPOS3604 drives are programmable at user’s level. In simple applications, such a unit can operate as a single-axis motion controller & drive in stand-alone mode, autonomously executing the program that resides in its non-volatile memory. In systems that require a host, an iPOS drive can operate as an intelligent slave – executing motion sequences triggered by input lines or commands received via RS-232 or CAN bus communication – or as a standard EtherCAT or CANopen drive.

iPOS3604 drives can be quickly configured and tuned using one of Technosoft software platforms EasySetUp or EasyMotion Studio. EasySetUp is recommended when the motion programming is done exclusively via an external device (a PC / PLC using Technosoft motion libraries, a CANopen or an EtherCAT master), while EasyMotio Studio includes both drive setup and motion programming.

  • Fully digital drive with embedded motion controller
  • For brushless, DC brush and step motors
  • Motor supply / logic supply: 12-36 V
  • Output current: 4 A continuous, 10 A peak
  • TMLCAN & CANopen (default); EtherCAT (optional)
  • Open-frame PCB, vertical plug-in design
  • Size: 56 x 28.8 x 7.6 mm (2.2 x 1.1 x 0.3 in)
Amount: from 279.40 CHF
  • Fully digital drive with embedded motion controller
  • For brushless, DC brush and step motors
  • Motor supply / logic supply: 12-36 V
  • Output current: 4 A continuous, 10 A peak
  • TMLCAN & CANopen (default) or EtherCAT (optional)
  • Open-frame PCB, horizontal plug-in design
  • Size: 55 x 26.4 x 13.1 mm (~ 2.2 x 1 x 0.5 in)
Amount: from 314.10 CHF
  • Fully digital drive with embedded motion controller
  • For brushless, DC brush and step motors
  • Motor supply / logic supply: 12-36 V
  • Output current: 4 A continuous, 10 A peak
  • TMLCAN & CANopen communication
  • Closed-frame with vertical retractable connectors
  • Size: 73 x 45 x 16 mm (~ 2.87 x 1.77 x 0.63 in)
Amount: from 339.25 CHF
  • Fully digital drive with embedded motion controller
  • For brushless, DC brush and step motors
  • Motor supply / logic supply: 12-36 V
  • Output current: 4 A continuous, 10 A peak
  • TMLCAN & CANopen communication
  • Covered-frame provided with retractable connectors
  • Size: 80 x 55 x 16.30 mm (~ 3.15 x 2.17 x 0.64 in)
Amount: from 339.25 CHF
Copyright MAXXmarketing Webdesigner GmbH
   

 

TECHNOSOFT SA, av. des Alpes 20, CH-2000 Neuchâtel, Switzerland. 
Website developed by Adsoft Solutions.