iPOS8010/iPOS8020 Intelligent Servo Drives – 800 W/1600 W

The iPOS8010 and iPOS8020 intelligent drives are based on a new modular concept of panel-mounted drives, offering a very compact, cost-effective solution for the control of rotary or linear brushless, DC brush, and step motors of powers up to 800 W or 1600 W, with up to 80 V rated voltages.

Using either CAN or EtherCAT as field bus, the iPOS8010 and iPOS8020 units embed motion controller, drive and PLC features into a single unit. The CAN versions can operate as standard CANopen drives, or as intelligent drives that can execute complex motion profiles, programmed directly at drive level with the high level Technosoft Motion Language (TML). As intelligent drives, they can perform many of the central unit's tasks, eliminating the need for such a device in many single or multi-axis applications. The EtherCAT versions can also operate as standard EtherCAT drives (CoE protocol) or as intelligent slaves that can independently execute complex motion functions from the drive's memory.

Having 2 feedback connectors, the iPOS8010 and iPOS8020 drives can use both motor and load position in advanced dual-loop control algorithms that minimize the transmission backlash negative effects. Depending on the model, various combinations of incremental encoders (quad or sine/cosine), resolvers and absolute encoders (SSI, BiSS, EnDAT, Hiperface, Absolute A) can be used. An iPOS80x0 drive has drive enable inputs.

The iPOS80x0 drives can be quickly configured and tuned using either of Technosoft's software platforms, EasySetUp or EasyMotion Studio. EasySetUp is recommended when motion programming is done exclusively via an external device (a PC or PLC using Technosoft motion libraries, a CANopen or EtherCAT master), while EasyMotio Studio includes both drive setup and motion programming using TML.

  • Fully digital drive with embedded motion controller
  • For brushless, DC brush, step & linear motors
  • Motor supply: 12-80 V, logic supply: 12-36 V
  • Output current: 10 A continuous, 20 A peak
  • TMLCAN & CANopen communication
  • Drive enable circuit
  • Incremental & absolute encoders, resolvers
  • Size: 139 x 94 x 25 mm (~5.47 x 3.7 x 0.98 in)
Amount: from 339.25 CHF
  • Fully digital drive with embedded motion controller
  • For brushless, DC brush, step & linear motors
  • Motor supply: 12-80 V, logic supply: 12-36 V
  • Output current: 10 A continuous, 20 A peak
  • EtherCAT communication
  • Drive enable circuit
  • Incremental & absolute encoders, resolvers
  • Size: 139 x 94 x 25 mm (~5.47 x 3.7 x 0.98 in)
Amount: from 339.25 CHF
  • Fully digital drive with embedded motion controller
  • For brushless, DC brush, step & linear motors
  • Motor supply: 12-80 V, logic supply: 12-36 V
  • Output current: 20 A continuous, 40 A peak
  • TMLCAN & CANopen communication
  • Drive enable circuit
  • Incremental & absolute encoders, resolvers
  • Size: 139 x 94 x 25 mm (~5.47 x 3.7 x 0.98 in)
Amount: from 339.00 CHF
  • Fully digital drive with embedded motion controller
  • For brushless, DC brush, step & linear motors
  • Motor supply: 12-80 V, logic supply: 12-36 V
  • Output current: 20 A continuous, 40 A peak
  • EtherCAT communication
  • Drive enable circuit
  • Incremental & absolute encoders, resolvers
  • Size: 139 x 94 x 25 mm (~5.47 x 3.7 x 0.98 in)
Amount: from 339.25 CHF
Copyright MAXXmarketing Webdesigner GmbH
   

 

TECHNOSOFT SA, av. des Alpes 20, CH-2000 Neuchâtel, Switzerland. 
Website developed by Adsoft Solutions.