Plug-in Intelligent Servo Drives

Technosoft intelligent plug-in servo drives are particularly adapted for motion control applications where space is critical.

The family of Technosoft intelligent plug-in minidrives (IPS110, PIM2401, PIM2403, PIM3605 and ISCMxx05) is specially developed for high-precision motion control applications. Manufactured with simple pins, the drives have an architecture that allows for a faster assembly and installation, letting the users insert them in seconds. Based on the Technosoft MotionChipTMDSP technology, they embed motion controller, drive and PLC functionality in one unit, and have the flexibility to control all types of brushless, step, DC or linear motors from 25 W (IPS110) up to 400 W (ISCM8005).

Their hardware structure is based on a cost optimised design integrating all the basic motor control functions and motion control functionalities on a single plug-in module.

  • 0.5-A stepper / 1-A DC brush digital amplifier
  • 5 V logic, 12 to 45 V motor power supply
  • Digital inputs / outputs, analog inputs
  • Quadrature encoder
  • RS-232 and CAN / CANopen

    NOT recommended for new designs! (Contact us)
Amount: from 225.63 CHF
  • For brushless, DC brush and step motors
  • 6 to 24 V logic and motor power supply
  • 1 A continuous, 3 A peak current
  • Digital inputs / outputs, analog inputs
  • Quadrature encoder, Hall / linear Halls
  • RS-232 and CAN / CANopen
Amount: from 231.73 CHF
  • For brushless, DC brush and step motors
  • 12 to 24 V logic and motor power supply
  • 3 A continuous, 6 A peak current
  • Digital inputs / outputs, analog inputs
  • Quadrature encoder, Hall / linear Halls
  • RS-232 and CAN / CANopen
Amount: from 291.53 CHF
  • For brushless, DC brush and step motors
  • 12 to 36 V logic and motor power supply
  • 5 A continuous, 16 A peak current
  • Digital inputs / outputs, analog inputs
  • Quadrature encoder, Hall / linear Halls
  • RS-232 and CAN / CANopen
Amount: from 339.25 CHF
  • For brushless, DC brush and step motors
  • 12-48 V logic, 48-80 V motor power supply
  • Current capability: 5 A cont., 16 A peak
  • Digital input / outputs and analog inputs
  • Quadrature encoder, Hall / linear Halls
  • RS-232 and CAN / CANopen
Amount: from 184.00 CHF
  • For brushless, DC brush and step motors
  • Motor supply: 12-50 V; logic supply: 12-36 V
  • Output current: 8 A continuous, 20 A peak
  • TMLCAN & CANopen (default); EtherCAT (optional)
  • Size: 56 x 42 x 12.4 mm (~ 2.2 x 1.65 x 0.49 in)

    NOT recommended for new designs! (Contact us)
Amount: from 339.25 CHF
Copyright MAXXmarketing Webdesigner GmbH
   

 

TECHNOSOFT SA, av. des Alpes 20, CH-2000 Neuchâtel, Switzerland. 
Website developed by Adsoft Solutions.