IBL2401 – Intelligent Servo Drive, 25 W

IBL2401 is a high-performance digital servo drive with embedded intelligence, based on the latest DSP controller technology. This drive can be used to control brushless DC, brushless AC, and DC motors.

IBL2401 is a flexible, cost-effective, compact solution particularly adapted to the distributed and co-ordinated control of brushless or DC motors of powers up to 25 W, and voltages up to 24 V. Its hardware structure is based on a cost optimised design integrating all the basic motor control functions and motion control functionalities on a single module. A series of I/O signals, both digital and analog, are available for easy interfacing with the application.

Typical applications include distributed motor control, with possibilities of gearing and electronic CAM functions in a CAN network operation (optional configuration).

Easy configuration and programming with Technosoft EasyMotion Studio.

Features:

• Fully digital servo amplifier with embedded intelligence and PLC functionality
• Suitable for brushless (sinusoidal or trapezoidal commutation) and DC brush motors
• Compact design (60 x 44 x 16 mm)
• Various control modes:
  • Torque, speed or position control
  • Electronic gearing, contouring, profiling
  • Step motor emulation (step & direction output)
  • Control of external variables (pressure, flow, temperature etc.)
• Powerful TML instruction set for the definition and execution of motion sequences in:
  • Single-axis or multi-axis control (master or slave mode)
  • Standalone operation with stored motion sequences
• RS-232 serial communication
• CAN-Bus 2.0B up to 1 Mbit/s (optional)
  Programmable digital inputs/outputs and analog inputs
  • 5 inputs, 5 or 24 V compatible (Enable, Pulse and Direction, Limit Switches)
  • 2 outputs (open-collector), 5 or 24 V compatible (Ready, GPO)
  • Differential quadrature encoder and digital Hall interface
  • Linear Hall sensors interface
  • 2 analog inputs, 0/+5 V range (+/- 10 V optional)
• Single power supply for logic and motor (6-24 V)
• High current capability (1 A continuous , 3.6 A peak current)
• Protection against over-current, short circuit, earth fault, over-temperature, over-voltage, under-voltage, I²t, control error
• (2 x 16) 2.54-mm screw terminal connectors

Ordering Information: Part Number Product Name, Description EDS P034.001.E102 EasyMotion Studio setup & programming software P035.001.E001 IBL2401 24V, 1A, RS232   P035.001.E002 IBL2401 24V, 1A, RS232 and CAN   P035.001.E012 IBL2401 24V, 1A, CANopen (BL & DC)* EDS P035.001.E013 IBL2401 24V, 1A, CANopen (ST)** EDS P035.001.E014 IBL2401 24V, 1A, CANopen (LH)*** EDS

TML Motion Libraries: Part Number Product Name, Description P040.001.E101 TML_LIB for Visual C, VB, Delphi P040.001.E201 TML_LIB for LabVIEW P040.001.E301 TML_LIB for Simatic S7 P040.001.E311 TML_LIB for Omron CJ1

List of all Technosoft drives and motors