|
IPM100 Series - 100W Intelligent Servo Drives
|
|
|
IPM100 is a high precision, fully digital
servo drive, with embedded intelligence, and built-in 100W
power amplifier. The drive is usable for brushless motors with
sinusoidal or trapezoidal commutation, or DC brush motors.
Programmable with the high-level Technosoft Motion Language (TML), the IPM100 embeds on one board advanced motion control and PLC-specific functionality.
Combined with IPM
Motion Studio – a set of graphical
tools for quick configuration, tuning
and motion programming – the
IPM640 offers a flexible
and easy to implement solution for
a wide range of applications.
|
|
|
|
|
Features:
|
|
Single-axis drive, operating in stand-alone or slave mode (distributed intelligence)
|
|
|
Control modes: position, speed, torque, voltage, external variable
|
|
|
Motion modes: profiling, contouring, pulse & direction, electronic gearing
|
|
|
Programmable protections: overcurrent, over and under voltage, I2t
|
|
|
Output current: 3 A continuous, 6.3 A peak
|
|
|
Supply voltage: 12 to 36 V DC
|
|
|
Compact open-frame design (64 x 104 x 15) mm
|
|
|
DSP controller technology. Based on Technosoft MotionChipTM
|
|
|
10-bit PWM @ 20KHz
|
|
|
RS-232 or RS-485 serial communication, up to 115 k baud rate
|
|
|
Operation in multiple-axis structures, via the RS-485 communication channel
|
|
|
Quadrature incremental encoder interface
|
|
|
3 inputs for Hall sensors connection
|
|
|
2 limit switches inputs and Drive ENABLE input (TTL)
|
|
|
5 programmable general purpose I/O lines (TTL)
|
|
|
Combined with IPM Motion Studio,
a graphical platform for quick configuration, tuning and motion programming,
the IPM100 represents a flexible and easy to implement solution for a wide range of
applications.
Starter
Kit IPM100
Complete packages for the evaluation of
the drive, containing an IPM100, brushless motor,
I/O board, the IPM Motion Studio
software, and a collection of application notes and
complete documentation. The ideal environment
needed to evaluate our drives and to build and test your
motion application. All in a ready-to-run, plug-and-play
configuration!
For further details, quotations, or for support regarding this product, please
contact us at:
contact@technosoftmotion.com
|
|
Ordering information
|
Part Number
|
Description
|
|
P069.001.C01
|
IPM100-C01; standard with J1, J2, J3 and J7 connectors
|
|
P069.001.C02
|
IPM100-C02; as C01 but with DB9 RS232/485 connector
|
|
P069.001.C03
|
IPM100-C03; as C02, with J6, J9 mounted
|
|
P069.001.C00
|
IPM100-C00; no connectors mounted
|
|
|
|
|
|
For ordering:
Fax [41] (0)32 732 5504.
|
|
|
|
|
