TECHNOSOFT - Intelligent Servodrives

PMCM4805 / PMCM8005 - Programmable Motor Control Modules

PMCM4805 and PMCM8005 are fully digital programmable motor control modules that offer compact and cost-effective solutions for brushless motors control. These modules are particularly adapted for sensorless control of brushless motors of powers up to 100 W, at voltages up to 80 V. Higher voltage versions (325 V) are in preparation.

Typical usage includes constant or variable speed drives such as pumps or fan applications. The modules have a cost optimized hardware structure, integrating all the basic motor control functions on a double-sided credit card format.

PMCM4805

Features:

Fully Digital Motor Control Module

Suitable for brushless motors with and without sensors, with sinusoidal or trapezoidal commutation

Compact open-frame (70 X 50 mm) credit card format, or DIN-rail versions are available

Various motor control modes: speed control mode (with or without sensors); torque control mode

RS-232 serial communication, up to 115 k baud rate

Optional encoder / Hall sensor inputs

2 analog inputs, +/-10V range

5 to 8 digital inputs/outputs

Motor power supply: 48 V (the PMCM4805), or 80 V (the PMCM8005)

High output current: 5 A continuous, 16 A peak

Protection against overcurrent, shortcircuit, earth fault, over- and undervoltage, I²t, control error

2.54 mm pitch edge connector

Intelligent servo control options are also available (ISCM series)

The PMCM4805 / PMCM8005 line complements the ISCM Series (Intelligent Servo Control Modules), which offer higher servo and network capabilities (CAN) in the same compact size.

Ordering Information:

Part Number
Description

P047.001.E001
PMCM4805; 48V; 5A

P047.001.E101
PMCM8005; 80V, 5A

P052.001.E001 PMCM4805; 48V, 5A, DIN rail

P052.001.E101 PMCM8005; 80V, 5A, DIN rail

P047.001.E284
PMCM4805/8005 I/O board

If you want to ask further questions about this product, or to report suspected problems, please contact Technosoft at: contact@technosoftmotion.com