Motion Control Kits

MCK2812, MCK2407 and MCK28335 DSP Motion Control Kits provide the fastest way to learn, evaluate, develop, test and implement DSP Digital Motion Control algorithms. Kits include a complete hardware development platform (DSP controller board, power inverter and a brushless motor equipped with Hall sensors and 500-line encoder) powered by high level graphical programming tools. You can directly drive the motor in AC or DC brushless mode through a set of ready-to-run examples. The dynamic behavior of the real time system can easily be analyzed through graphical displays of any of the system variables, for a quick optimization of the control algorithms.

The kits include the Digital Motor Control Developer (DMCD-Lite) software platform with integrated debugger, basic assembler, linker, and many other useful features for a fast, professional development of your specific motion control application.

This combination of hardware and software represents a training, test and basic development
unit for high performance motor control, helping you to quickly understand the advantages of
using DSP controllers for real-time motion control applications.

The Motion Control Kit Family

MCK28335 DSP Motion Control Kit MCK2812 DSP Motion Control Kit MCK2407 DSP Motion Control Kit

Upgrades from these kits

MCK28335 DSP Motion Control Kit Part number: 24TKI83011 MCK28335 DSP Motion Control Kit is a ready-to-run development/evaluation package based on the TMS320F28335 floating-point digital signal controller (DSC). In addition to the MSK28335 DSP Motion Starter Kit, it includes a power module (50W) and a brushless motor equipped with Hall sensors and 500-line encoder for direct experimentation. All communication between PC and DSP board is done through the RS-232 interface using a real-time serial communication monitor (resident in the DSP flash) with download / upload functions, debug and inspect facilities. PROCEV2833x, a graphical motion control evaluation/analysis software for the specific motor control peripherals embedded in the TMS320F28335 DSC, is provided to rapidly familiarize you with these functions. A set of ready-to-run examples (with C source code) is included. DMCD28x-Lite, the Digital Motion Control Development platform with integrated debugger, basic assembler, linker, and many other facilities, will allow you to create, modify and test assembler applications within a highly organized project management system. Demos for AC and DC brushless motor speed control are included. Through an advanced Windows IDE, all system variables can be visualized in real time, and motion parameters can be customized and downloaded into the DSC for a quick optimization of the control algorithms. Component List... MSK28335 board with TMS320F28335 running at 150 MHz, 128-kWords 0 wait-state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces PM50, 3-phase inverter power module Brushless motor equipped with Hall sensors and 500-line encoder MCWIN software: Real-time serial communication monitor PROCEV2833x, Processor evaluation software (with ASM/C source code) DMCD28x-Lite, Digital Motor Control Developer software Brushless Motor Control Demos: trapezoidal and sinusoidal modes. User's manuals Selection guide: all TMS320F28335 based kits
MCK2812 DSP Motion Control Kit Part number: 24TKI80011 The MCK2812 DSP Motion Control Kit is a ready-to-run development/evaluation package. In addition to the MSK2812 DSP Motion Starter Kit, it includes a power module (50W) and a brushless motor equipped with Hall sensors and 500-line encoder for direct experimentation. All communication between PC and DSP board is done through the RS-232 interface using a real-time serial communication monitor (resident in the DSP flash) with download / upload functions, debug and inspect facilities. PROCEV28x, a graphical motion control evaluation/analysis software for the specific motor control peripherals embedded in the TMS320F2812 DSP, is provided to rapidly familiarize you with these functions. A set of ready-to-run examples (with ASM/C source code) is included. DMCD28x-Lite, the Digital Motion Control Development platform with integrated debugger, basic assembler, linker, and many other facilities, will allow you to create, modify and test assembler applications within a highly organized project management system. Demos for AC and DC brushless motor speed control are included. Through an advanced Windows IDE, all system variables can be visualized in real time, and motion parameters can be customized and downloaded into the DSP for a quick optimization of the control algorithms. Component List... MSK2812 board with TMS320F2812 running at 150 MHz, 128-kWords 0-wait state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces PM50, 3-phase inverter power module Brushless motor equipped with Hall sensors and 500-line encoder MCWIN software: Real-time serial communication monitor PROCEV28x, Processor evaluation software (with ASM/C source code) DMCD28x-Lite, Digital Motor Control Developer software Brushless Motor Control Demos: trapezoidal and sinusoidal modes. User's manuals Selection guide: all TMS320F2812 based kits
MCK2407 DSP Motion Control Kit Part number: 24TKI70011 The MCK2407 DSP Motion Control Kit is a ready-to-run development/evaluation package. In addition to the MSK2407 DSP Motion Starter Kit, it includes a power module (50W) and a brushless motor equipped with Hall sensors and 500-line encoder for direct experimentation. All communication between PC and DSP board is done through the RS-232 interface using a real-time serial communication monitor (resident in the DSP flash) with download / upload functions, debug and inspect facilities. PROCEV2407, a graphical motion control evaluation/analysis software for the specific motor control peripherals embedded in the TMS320LF2407 DSP, is provided to rapidly familiarize you with these functions. A set of ready-to-run examples (with ASM source code) is included. DMCD-Lite, the Digital Motion Control Development platform with integrated debugger, basic assembler, linker, and many other facilities, will allow you to create, modify and test assembler applications within a highly organized project management system. Demos for AC and DC brushless motor speed control are included. Through an advanced Windows IDE, all system variables can be visualized in real time, and motion parameters can be customized and downloaded into the DSP for a quick optimization of the control algorithms. Component List... MSK2407 board with TMS320LF2407 running at 30/40 MHz, 64-kB 0-wait state external RAM, 2x12-bit accuracy D/A outputs, RS-232 and JTAG interfaces PM50, 3-phase inverter power module Brushless motor equipped with Hall sensors and 500-line encoder MCWIN software: Real-time serial communication monitor PROCEV2407, Processor evaluation software (with ASM/C source code) DMCD-Lite, Digital Motor Control Developer Brushless Motor Control Demos: trapezoidal and sinusoidal modes. User's manual Selection guide: all TMS320LF2407 based kits
NOTE: The equivalent MCK240 DSP Motion Control Kit, based on TMS320F240, has been discontinued. To users of MCK240 kits: For software updates, click here. For the MCK240 user manual, click here. For support / upgrade queries: contact@technosoftmotion.com