Motion Starter Kits

MSK28335, MSK28035, MSK2812 and MSK2407 DSP Motion Starter Kits are the best DSP motion control platforms based on the TI Delfino™ TMS320F28335 and Piccolo™ TMS320F28035 (floating-point) or TMS320F2812 and TMS320LF2407 (fixed-point) processors, for a quick start of software applications using a DSP controller.

With Technosoft kits you will discover the Digital Motor Control Developer (DMCD-lite) software platform with integrated debugger, basic assembler, linker, and many other features that enable a quick development of specific motion control applications.

These kits can later be complemented with other Technosoft modules like: power modules, motors, I/O boards, etc., and software modules like source code libraries and simulation schemes, for a step-by-step upgrade as your application's growth requires it.

The Motion Starter Kit Family

MSK28335 DSP Motion Starter Kit MSK28035 DSP Motion Starter Kit MSK2812 DSP Motion Starter Kit MSK2407 DSP Motion Starter Kit

Upgrades from these kits

MSK28335 DSC Motion Starter Kit Part number: 24TKI83001 The MSK28335 DSP Motion Starter Kit is a basic evaluation package for the Texas Instruments Delfino™ TMS320F28335 floating-point Digital Signal Controller (DSC). Operating at a 150-MHz frequency, with double event-manager signals, increased internal memory, etc., this first floating-point controller ever offers all features needed for digital motor control implementation. All communication between the the PC and the DSC board is done through the RS-232 interface using a real-time serial communication monitor (resident in the DSC flash) with download / upload functions, debug and inspect facilities. PROCEV2833x, a graphical motion control evaluation/analysis software for the specific motor control peripherals embedded in the TMS320F281335, is provided to rapidly familiarize you with these functions. A set of ready-to-run examples (with C source code) is included. DMCD28x-Lite, the Digital Motion Control Development platform with integrated debugger, basic assembler, linker and many other facilities, will allow you to create, modify and test assembler applications within a highly organized project management system. Component List... MSK28335 board with Delfino TMS320F28335 running at 150 MHz, 128-kWords 0 wait-state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces MSWIN28335 software: Real-time serial communication monitor PROCEV2833x, Processor evaluation software (with C source code examples) DMCD28x-Lite, Digital Motor Control Developer software User's manuals Selection guide: all TMS320F28335 based kits
MSK28035 DSC Motion Starter Kit Part number: 24TKI82001 The MSK28035 DSP Motion Starter Kit is a basic evaluation package for the Texas Instruments Piccolo™ TMS320F28035 floating-point Digital Signal Controller (DSC). Operating at a 150-MHz frequency, with double event-manager signals, increased internal memory, etc., this first floating-point controller ever offers all features needed for digital motor control implementation. All communication between the the PC and the DSC board is done through the RS-232 interface using a real-time serial communication monitor (resident in the DSC flash) with download / upload functions, debug and inspect facilities. PROCEV2803x, a graphical motion control evaluation/analysis software for the specific motor control peripherals embedded in the TMS320F281335, is provided to rapidly familiarize you with these functions. A set of ready-to-run examples (with C source code) is included. DMCD28x-Lite, the Digital Motion Control Development platform with integrated debugger, basic assembler, linker and many other facilities, will allow you to create, modify and test assembler applications within a highly organized project management system. Component List... MSK28035 board with Piccolo TMS320F28035 running at 150 MHz, 128-kWords 0 wait-state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces MSWIN28035 software: Real-time serial communication monitor PROCEV2803x, Processor evaluation software (with C source code examples) DMCD28x-Lite, Digital Motor Control Developer software User's manuals Selection guide: all TMS320F28035 based kits
MSK2812 DSP Motion Starter Kit Part number: 24TKI80001 The MSK2812 DSP Motion Starter Kit is a basic evaluation package for the Texas Instruments TMS320F2812 DSP motion controller with CAN interface. Operating at a 150-MHz frequency, with double event-manager signals, increased internal memory, etc., this new chip offers all features needed for an advanced digital motor control implementation. All communication between the the PC and the DSP board is done through the RS-232 interface using a real-time serial communication monitor (resident in the DSP flash) with download / upload functions, debug and inspect facilities. PROCEV28x, a graphical motion control evaluation/analysis software for the specific motor control peripherals embedded in the TMS320F2812 DSP, is provided to rapidly familiarize you with these functions. A set of ready-to-run examples (with ASM source code) is included. DMCD28x-Lite, the Digital Motion Control Development platform with integrated debugger, basic assembler, linker and many other facilities, will allow you to create, modify and test assembler applications within a highly organized project management system. Component List... MSK2812 board with TMS320F2812 running at 150 MHz, 128-kWords 0-wait state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces MSWIN2812 software: Real-time serial communication monitor PROCEV28x, Processor evaluation software (with ASM source code) DMCD28x-Lite, Digital Motor Control Developer software User's manuals Selection guide: all TMS320F2812 based kits
MSK2407 DSP Motion Starter Kit Part number: 24TKI70001 The MSK2407 DSP Motion Starter Kit is a basic evaluation package for the Texas Instruments TMS320LF2407 DSP motion controller with CAN interface. Operating at a 30/40-MHz frequency, with double event-manager signals, increased internal memory, etc., this new chip offers all features needed for an advanced digital motor control implementation. All communication between the the PC and the DSP board is done through the RS-232 interface using a real-time serial communication monitor (resident in the DSP flash) with download / upload functions, debug and inspect facilities. PROCEV2407, a graphical motion control evaluation/analysis software for the specific motor control peripherals embedded in the TMS320F2407 DSP, is provided to rapidly familiarize you with these functions. A set of ready-to-run examples (with ASM source code) is included. DMCD-Lite, the Digital Motion Control Development platform with integrated debugger, basic assembler, linker and many other facilities, will allow you to create, modify and test assembler applications within a highly organized project management system. Component List... MSK2407 board with TMS320LF2407 running at 30/40 MHz, 64-kB 0-wait state external RAM, 2x12-bit accuracy D/A outputs, RS-232 and JTAG interfaces MSWIN2407 software: Real-time serial communication monitor PROCEV2407, Processor evaluation software (with ASM source code) DMCD-Lite, Digital Motor Control Developer software User's manuals Selection guide: all TMS320LF2407 based kits