Professional Development Kits with Applications

These professional DSP development tools, which include source code / object code application examples and libraries, represent the most advanced offer in the Digital Motor Control field. All packages are self-contained, so they allow you to start the evaluation and development immediately.

You will discover how easy it is to control a brushless motor (in trapezoidal or sinusoidal mode), or an induction motor (in vector control or V/f mode). Moreover, for experienced designers, these examples can represent a useful starting point for any advanced motion control applications that you may want. You can rely on Technosoft Professional Tools to meet your challenging project's schedule and complexity.

The Family of Professional Development Kits with Applications

MCK28335 Kit C Pro-S(BL) Part number: 24TKI83313 MCK28335 Kit C Pro-S(BL) is a complete evaluation and development package based on the TMS320F28335 floating-point DSC. In addition to MCK28335 Kit C Pro, this kit comes with TI’s C-Compiler, Assembler and Linker included. It also includes a complete Digital Motion Control application source code, fully documented, for the speed control of a brushless motor operating in sinusoidal (PMSM), or trapezoidal mode (BLDC). The software, a combination between C and assembler C-callable functions (for optimization purposes), is the ideal starting point for your application development. A ready-to-run project for DMCD28x-Pro describing the application is also included. Having a complete operational code, you can: use it as such, adapt it for some specific algorithms and functions not present in this package, or parameterize it for your own motor/amplifier structure. Component List... MSK28335 board with TMS320F28335 running at 150 MHz, 128-kWords 0 wait-state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces PM50, 3-phase inverter power module Brushless motor equipped with Hall sensors and 500-line encoder MCWIN28335 Pro software: Real-time serial communication monitor PROCEV2833x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software Brushless Motor Control Demos: trapezoidal and sinusoidal modes DMCode-S(BL), source code application for the speed control of a brushless motor (sinusoidal and trapezoidal modes) TI software tools: C-Compiler, Assembler and Linker (TMS320C2833x) User's manuals Selection guide: all TMS320F28335 based kits
MCK28035 Kit C Pro-S(BL) Part number: 24TKI82313 MCK28035 Kit C Pro-S(BL) is a complete evaluation and development package based on the Piccolo™ TMS320F28035 floating-point DSC. In addition to MCK28035 Kit C Pro, this kit comes with TI’s C-Compiler, Assembler and Linker included. It also includes a complete Digital Motion Control application source code, fully documented, for the speed control of a brushless motor operating in sinusoidal (PMSM), or trapezoidal mode (BLDC). The software, a combination between C and assembler C-callable functions (for optimization purposes), is the ideal starting point for your application development. A ready-to-run project for DMCD28x-Pro describing the application is also included. Having a complete operational code, you can: use it as such, adapt it for some specific algorithms and functions not present in this package, or parameterize it for your own motor/amplifier structure. Component List... MSK28035 board with TMS320F28035 running at 60 MHz, 64-kWords 0 wait-state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces PM50, 3-phase inverter power module Brushless motor equipped with Hall sensors and 500-line encoder MCWIN28035 Pro software: Real-time serial communication monitor PROCEV2803x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software Brushless Motor Control Demos: trapezoidal and sinusoidal modes DMCode-S(BL), source code application for the speed control of a brushless motor (sinusoidal and trapezoidal modes) TI software tools: C-Compiler, Assembler and Linker (TMS320C2803x) User's manuals Selection guide: all TMS320F28035 based kits
MCK2812 Kit C Pro-S(BL) Part number: 24TKI80313 MCK2812 Kit C Pro-S(BL) is a complete evaluation and development package based on the MCK2812 Kit C Pro. This kit comes with TI’s C-Compiler, Assembler and Linker included. It also includes a complete Digital Motion Control application source code, fully documented, for the speed control of a brushless motor operating in sinusoidal (PMSM), or trapezoidal mode (BLDC). The software, a combination between C and assembler C-callable functions (for optimization purposes), is a very good starting point for your application development. A ready-to-run project for DMCD28x-Pro describing the application is also included. Having a complete operational code, you can: use it as such, adapt it for some specific algorithms and functions not present in this package, or parameterize it for your own motor/amplifier structure. Component List... MSK2812 board with TMS320F2812 running at 150 MHz, 128-kWords 0-wait state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces PM50, 3-phase inverter power module Brushless motor equipped with Hall sensors and 500-line encoder MCWIN2812 Pro software: Real-time serial communication monitor PROCEV28x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software Brushless Motor Control Demos: trapezoidal and sinusoidal modes DMCode-S(BL), source code application for the speed control of a brushless motor (sinusoidal and trapezoidal modes) TI software tools: C-Compiler, Assembler and Linker (TMS320C28x) User's manuals Selection guide: all TMS320F2812 based kits
MCK2407 Kit C Pro-S(BL) Part number: 24TKI70313 MCK2407 Kit C Pro-S(BL) is a complete evaluation and development package based on the MCK2407 Kit C Pro. It comes with TI’s C-Compiler, Assembler and Linker included. The kit also includes a complete Digital Motion Control application source code, fully documented, for the speed control of a brushless motor operating in sinusoidal (PMSM) or trapezoidal mode (BLDC). The software, a combination between C and assembler C-callable functions (for optimization purposes), is a very good starting point for your application development. A ready-to-run project for DMCD-Pro describing the application is also included. Having a complete operational code, you can: use it as such, adapt it for some specific algorithms and functions not present in this package, or parameterize it for your own motor/amplifier structure. Component List... MSK2407 board with TMS320LF2407 running at 30/40 MHz, 64-kB 0-wait state external RAM, 2x12 bits accuracy D/A outputs, RS-232 and JTAG interfaces PM50, 3-phase inverter power module Brushless motor equipped with Hall sensors and 500-line encoder MCWIN2407 Pro software: Real-time serial communication monitor PROCEV2407, Processor evaluation software (with ASM source code) DMCD-Pro, Digital Motor Control Developer software Brushless Motor Control Demos: trapezoidal and sinusoidal modes DMCode-S(BL), source code application for the speed control of a brushless motor (sinusoidal and trapezoidal modes) TI software tools: C-Compiler, Assembler and Linker (TMS320C2x/C2xx/C5x) User's manuals Selection guide: all TMS320LF2407 based kits
MCK28335 Kit C Pro-S(IM) Part number: 24TKI83315 MCK28335 Kit C Pro-S(IM) is a complete evaluation and development package based on the Delfino™ TMS320F28335 floating-point DSC. In addition to MSK28335 Pro, this kit comes with TI’s C-Compiler, Assembler and Linker included. It also includes a complete Digital Motion Control application source code, fully documented, for the speed control of an induction motor operating in Vector control or V/f mode. The software, a combination between C and assembler C-callable functions (for optimization purposes), is a very good starting point for your application development. A ready-to-run project for DMCD28x-Pro describing the application is also included. Having a complete operational code, you can: use it as such, adapt it for some specific algorithms and functions not present in this package, or parameterize it for your own motor/amplifier structure. Component List... MSK28335 board with TMS320F28335 running at 150 MHz, 128-kWords 0 wait-state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces ACPM750, 3-phase GBT power module (750 W, 4 A) Induction motor, 230 VAC, 370 W, with encoder MCWIN28335 Pro software: Real-time serial communication monitor PROCEV2833x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software DMCode-S(IM), source code application for the speed control of an induction motor (Vector Control and V/f) TI software tools: C-Compiler, Assembler and Linker (TMS320C2833x) User's manuals Selection guide: all TMS320F28335 based kits
MCK28035 Kit C Pro-S(IM) Part number: 24TKI82315 MCK28035 Kit C Pro-S(IM) is a complete evaluation and development package based on the Piccolo™ TMS320F28035 floating-point DSC. In addition to MSK28035 Pro, this kit comes with TI’s C-Compiler, Assembler and Linker included. It also includes a complete Digital Motion Control application source code, fully documented, for the speed control of an induction motor operating in Vector control or V/f mode. The software, a combination between C and assembler C-callable functions (for optimization purposes), is a very good starting point for your application development. A ready-to-run project for DMCD28x-Pro describing the application is also included. Having a complete operational code, you can: use it as such, adapt it for some specific algorithms and functions not present in this package, or parameterize it for your own motor/amplifier structure. Component List... MSK28035 board with TMS320F28035 running at 60 MHz, 64-kWords 0 wait-state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces ACPM750, 3-phase GBT power module (750 W, 4 A) Induction motor, 230 VAC, 370 W, with encoder MCWIN28035 Pro software: Real-time serial communication monitor PROCEV2803x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software DMCode-S(IM), source code application for the speed control of an induction motor (Vector Control and V/f) TI software tools: C-Compiler, Assembler and Linker (TMS320C2803x) User's manuals Selection guide: all TMS320F28035 based kits
MCK2812 Kit C Pro-S(IM) Part number: 24TKI80315 MCK2812 Kit C Pro-S(IM) is a complete evaluation and development package based on the MSK2812 Pro. It comes with TI’s C-Compiler, Assembler and Linker included. The kit also includes a complete Digital Motion Control application source code, fully documented, for the speed control of an induction motor operating in Vector control or V/f mode. The software, a combination between C and assembler C-callable functions (for optimization purposes), is a very good starting point for your application development. A ready-to-run project for DMCD28x-Pro describing the application is also included. Having a complete operational code, you can: use it as such, adapt it for some specific algorithms and functions not present in this package, or parameterize it for your own motor/amplifier structure. Component List... MSK2812 board with TMS320F2812 running at 150 MHz, 128-kWords 0-wait state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces ACPM750, 3-phase GBT power module (750 W, 4 A) Induction motor, 230 VAC, 370 W, with encoder MCWIN2812 Pro software: Real-time serial communication monitor PROCEV28x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software DMCode-S(IM), source code application for the speed control of an induction motor (Vector Control and V/f) TI software tools: C-Compiler, Assembler and Linker (TMS320C28x) User's manuals Selection guide: all TMS320F2812 based kits
MCK2407 Kit C Pro-S(IM) Part number: 24TKI70315 MCK2407 Kit C Pro-S(IM) is a complete evaluation and development package based on the MSK2407 Pro. It comes with TI’s C-Compiler, Assembler and Linker included. The kit also includes a complete Digital Motion Control application source code, fully documented, for the speed control of an induction motor operating in Vector control or V/f mode. The software, a combination between C and assembler C-callable functions (for optimization purposes), is a very good starting point for your application development. A ready-to-run project for DMCD-Pro describing the application is also included. Having a complete operational code, you can: use it as such, adapt it for some specific algorithms and functions not present in this package, or parameterize it for your own motor/amplifier structure. Component List... MSK2407 board with TMS320LF2407 running at 30/40 MHz, 64-kB 0-wait state external RAM, 2x12 bits accuracy D/A outputs, RS-232 and JTAG interfaces ACPM750, 3-phase GBT power module (750 w, 4 A) Induction motor, 230 VAC, 370 W, with encoder MCWIN2407 Pro software: Real-time serial communication monitor PROCEV2407, Processor evaluation software (with ASM source code) DMCD-Pro, Digital Motor Control Developer software DMCode-S(IM), source code application for the speed control of an induction motor (Vector Control and V/f) TI software tools: C-Compiler, Assembler and Linker (TMS320C2x/C2xx/C5x) User's manuals Selection guide: all TMS320LF2407 based kits
MCK28335 Kit C Pro-MS(BL) with MATLAB library Part number: 24TKI83316 MCK28335 Kit C Pro-MS(BL) is a complete evaluation and development package based on the MCK28335 Kit C Pro. It comes with TI’s C-Compiler, Assembler and Linker included. The kit also includes a complete Digital Motion Control source code library, fully documented, for the speed control of a brushless motor operating in sinusoidal (PMSM) mode. Component List... MSK28335 board with Delfino TMS320F28335 running at 150 MHz, 128-kWords 0 wait-state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces PM50, 3-phase inverter power module Brushless motor equipped with Hall sensors and 500-line encoder MCWIN28335 Pro software: Real-time serial communication monitor PROCEV2833x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software Brushless Motor Control Demos: trapezoidal and sinusoidal modes DMCode-MS(BL), Source code library for position and speed control of a brushless motor (sinusoidal mode), including a complete MATLAB model of the motion system, and the basic structure for DSP implementation TI software tools: C-Compiler, Assembler and Linker (TMS320C2833x) User's manuals Selection guide: all TMS320F28335 based kits
MCK28035 Kit C Pro-MS(BL) with MATLAB library Part number: 24TKI82316 MCK28035 Kit C Pro-MS(BL) is a complete evaluation and development package based on the MCK28035 Kit C Pro. It comes with TI’s C-Compiler, Assembler and Linker included. The kit also includes a complete Digital Motion Control source code library, fully documented, for the speed control of a brushless motor operating in sinusoidal (PMSM) mode. Component List... MSK28035 board with Piccolo TMS320F28035 running at 60 MHz, 64-kWords 0 wait-state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces PM50, 3-phase inverter power module Brushless motor equipped with Hall sensors and 500-line encoder MCWIN28035 Pro software: Real-time serial communication monitor PROCEV2803x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software Brushless Motor Control Demos: trapezoidal and sinusoidal modes DMCode-MS(BL), Source code library for position and speed control of a brushless motor (sinusoidal mode), including a complete MATLAB model of the motion system, and the basic structure for DSP implementation TI software tools: C-Compiler, Assembler and Linker (TMS320C2803x) User's manuals Selection guide: all TMS320F28035 based kits
MCK2812 Kit C Pro-MS(BL) with MATLAB library Part number: 24TKI80316 MCK2812 Kit C Pro-MS(BL) is a complete evaluation and development package based on the MCK2812 Kit C Pro. It comes with TI’s C-Compiler, Assembler and Linker included. The kit also includes a complete Digital Motion Control source code library, fully documented, for the speed control of a brushless motor operating in sinusoidal (PMSM) mode. Component List... MSK2812 board with TMS320F2812 running at 150 MHz, 128-kWords 0-wait state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces PM50, 3-phase inverter power module Brushless motor equipped with Hall sensors and 500-line encoder MCWIN2812 Pro software: Real-time serial communication monitor PROCEV28x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software Brushless Motor Control Demos: trapezoidal and sinusoidal modes DMCode-MS(BL), Source code library for position and speed control of a brushless motor (sinusoidal mode), including a complete MATLAB model of the motion system, and the basic structure for DSP implementation TI software tools: C-Compiler, Assembler and Linker (TMS320C28x) User's manuals Selection guide: all TMS320F2812 based kits
MCK28335 Kit C Pro-MS(IM) with MATLAB library Part number: 24TKI83317 MCK28335 Kit C Pro-MS(IM) is a complete evaluation and development package based on the MSK28335 Pro. It comes with TI’s C-Compiler, Assembler and Linker included. The kit also includes a complete Digital Motion Control source code library, fully documented, for the speed control of an induction motor operating in vector control mode. Component List... MSK28335 board with Delfino TMS320F28335 running at 150 MHz, 128-kWords 0 wait-state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces ACPM750, 3-phase GBT power module (750 W, 4 A) Induction motor, 230 VAC, 370 W, with encoder MCWIN28335 Pro software: Real-time serial communication monitor PROCEV2833x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software DMCode-MS(IM), source code library for position and speed control of an induction motor (vector control mode), including a complete MATLAB model of the motion system, and the basic structure for DSP implementation TI software tools: C-Compiler, Assembler and Linker (TMS320C2833x) User's manuals Selection guide: all TMS320F28335 based kits
MCK28035 Kit C Pro-MS(IM) with MATLAB library Part number: 24TKI82317 MCK28035 Kit C Pro-MS(IM) is a complete evaluation and development package based on the MSK28035 Pro. It comes with TI’s C-Compiler, Assembler and Linker included. The kit also includes a complete Digital Motion Control source code library, fully documented, for the speed control of an induction motor operating in vector control mode. Component List... MSK28035 board with Piccolo TMS320F28035 running at 60 MHz, 64-kWords 0 wait-state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces ACPM750, 3-phase GBT power module (750 W, 4 A) Induction motor, 230 VAC, 370 W, with encoder MCWIN28035 Pro software: Real-time serial communication monitor PROCEV2803x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software DMCode-MS(IM), source code library for position and speed control of an induction motor (vector control mode), including a complete MATLAB model of the motion system, and the basic structure for DSP implementation TI software tools: C-Compiler, Assembler and Linker (TMS320C2803x) User's manuals Selection guide: all TMS320F28035 based kits
MCK2812 Kit C Pro-MS(IM) with MATLAB library Part number: 24TKI80317 MCK2812 Kit C Pro-MS(IM) is a complete evaluation and development package based on the MSK2812 Pro. It comes with TI’s C-Compiler, Assembler and Linker included. The kit also includes a complete Digital Motion Control source code library, fully documented, for the speed control of an induction motor operating in vector control mode. Component List... MSK2812 board with TMS320F2812 running at 150 MHz, 128-kWords 0-wait state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces ACPM750, 3-phase GBT power module (750 W, 4 A) Induction motor, 230 VAC, 370 W, with encoder MCWIN2812 Pro software: Real-time serial communication monitor PROCEV28x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software DMCode-MS(IM), source code library for position and speed control of an induction motor (vector control mode), including a complete MATLAB model of the motion system, and the basic structure for DSP implementation TI software tools: C-Compiler, Assembler and Linker (TMS320C28x) User's manuals Selection guide: all TMS320F2812 based kits
MCK2812 Kit C Pro-VS(BL) with VisSim library Part number: 24TKI80318 MCK2812 Kit C Pro-VS(BL) is a complete evaluation and development package based on the MCK2812 Kit C Pro. It comes with TI’s C-Compiler, Assembler and Linker included. The kit also includes a complete Digital Motion Control source code library, fully documented, for the speed control of a brushless motor operating in sinusoidal (PMSM) mode. Component List... MSK2812 board with TMS320F2812 running at 150 MHz, 128-kWords 0-wait state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces PM50, 3-phase inverter power module Brushless motor equipped with Hall sensors and 500-line encoder MCWIN2812 Pro software: Real-time serial communication monitor PROCEV28x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software Brushless Motor Control Demos: trapezoidal and sinusoidal modes DMCode-VS(BL), Source code library for position and speed control of a brushless motor (sinusoidal mode), including a complete VisSim model of the motion system, and the basic structure for DSP implementation TI software tools: C-Compiler, Assembler and Linker (TMS320C28x) User's manuals Selection guide: all TMS320F2812 based kits
MCK2812 Kit C Pro-VS(IM) with VisSim library Part number: 24TKI80319 MCK2812 Kit C Pro-VS(IM) is a complete evaluation and development package based on the MSK2812 Pro. It comes with TI’s C-Compiler, Assembler and Linker included. The kit also includes a complete Digital Motion Control source code library, fully documented, for the speed control of an induction motor operating in vector control mode. Component List... MSK2812 board with TMS320F2812 running at 150 MHz, 128-kWords 0-wait state external RAM, 2x12-bit accuracy D/A outputs, RS-232, CAN-bus and JTAG interfaces ACPM750, 3-phase GBT power module (750 W, 4 A) Induction motor, 230 VAC, 370 W, with encoder MCWIN2812 Pro software: Real-time serial communication monitor PROCEV28x, Processor evaluation software (with ASM source code) DMCD28x-Pro, Digital Motor Control Developer software DMCode-VS(IM), source code library for position and speed control of an induction motor (vector control mode), including a complete VisSim model of the motion system, and the basic structure for DSP implementation TI software tools: C-Compiler, Assembler and Linker (TMS320C28x) User's manuals Selection guide: all TMS320F2812 based kits
NOTE: The equivalent MCK240 Kit C Pro-S(BL) / Kit C Pro-S(IM), based on TMS320F240, have been discontinued. To users of MCK240 kits: For software updates, click here. For the MCK240 user manual, click here. For support enquiries: support.tools@technosoftmotion.com