Motionless Start Solution

Technosoft has developed a new solution to determine rotor position after power on. The new starting method allows Technosoft drives to determine the position of the rotor with minimal movement. The robustness of our solution will produce a correct start of the motor even when it is in a mechanical limit. The new starting method is available as standard feature on Technosoft iPOS drives.

With the new solution, the drive determines the starting position with minimal movement. The back and forth cycle begins from where the motor was when the motion system was powered. The motor starts correctly even when it is placed against mechanical limit.

See video

Request details

 

 

   
Written on 30/11/-0001, 00:00 by admin
video8-esm Watch this practical video tutorial and understand how to set up your Technosoft drive, using the EasyMotion Studio platform. Follow all the steps you...
Written on 30/11/-0001, 00:00 by admin
video7-esm Watch this practical video tutorial and understand how to perform the motor setup with Technosoft drives, using the EasyMotion Studio platform. Follow...
Written on 30/11/-0001, 00:00 by admin
video5-team Technosoft has pioneered the intelligent drive as a cost-effective solution in many motion control applications. Embedding a motion controller and a...
Written on 30/11/-0001, 00:00 by admin
video6-motionless Technosoft has developed a new solution to determine rotor position after power on. The new starting method allows Technosoft drives to determine the...
   

 

TECHNOSOFT SA, av. des Alpes 20, CH-2000 Neuchâtel, Switzerland. 
Website developed by Adsoft Solutions.