iPOS4808 Intelligent Servo Drives – 400 W

The iPOS4808 intelligent drives are based on a new design concept offering cost-effective, compact, modular solutions for the control of rotary or linear brushless, DC brush, and step motors of powers up to 400 W, and rated voltages of up to 50 V. They embed motion controller, drive and PLC features on a single plug-in module. They can operate as standard CANopen or EtherCAT drives, or as intelligent drives that can be programmed to execute complex motion programs directly at drive level, using their built-in motion controller and the high level Technosoft Motion Language (TML). A series of I/O signals, both digital and analog, are available for easy interfacing with your application.

The iPOS4808 series offers flexible solutions, modular at various levels: vertical (VX model) or horizontal (MY model) plug-in cards, open-frame PCBs that can be integrated onto the user’s motherboard, or protected by a metal casing and provided with retractable connectors (BX model). Thanks to the TML instruction set, the iPOS4808 intelligent drives are programmable at user’s level. In simple applications, such a unit can operate as a single-axis motion controller & drive in stand-alone mode, autonomously executing the program residing in its non-volatile memory. In systems that require a host, an iPOS4808 drive can operate as an intelligent slave, executing motion sequences triggered by input lines or commands received via a communication bus.

The iPOS4808 MY models support the functional safety requirements with 2 STO inputs offering the integrity level SIL3/Cat3/PLe that eases the integration of the Technosoft drive into safety related installations.

The iPOS4808 drives can be quickly configured and tuned using one of Technosoft software platforms EasySetUp or EasyMotion Studio. EasySetUp is recommended when the motion programming is done exclusively via an external device (a PC / PLC using Technosoft motion libraries, a CANopen or an EtherCAT master), while EasyMotio Studio includes both drive setup and motion programming.

  • Fully digital servo drive with embedded motion controller
  • For brushless, DC brush and step motors
  • Motor supply: 12-50 V, logic supply: 12-36 V
  • Output current: 8 A continuous, 20 A peak
  • TMLCAN & CANopen (default); EtherCAT (optional)
  • Open-frame PCB, vertical plug-in design
  • Size: 56 x 44 x 6.9 mm (~ 2.2 x 1.73 x 0.27 in)
Amount: from 339.25 CHF
  • Fully digital servo drive with embedded motion controller
  • For brushless, DC brush and step motors
  • Motor supply: 12-50 V; logic supply: 12-36 V
  • Output current: 8 A continuous, 20 A peak
  • TMLCAN & CANopen (default); EtherCAT (optional)
  • STO inputs with safety integrity level SIL3/Cat3/PLe
  • Size: 60 x 43.6 x 12.4 mm (~ 2.36 x 1.72 x 0.49 in)
Amount: from 339.25 CHF
  • Fully digital servo drive with embedded motion controller
  • For brushless, DC brush, step & linear motors
  • Motor supply: 12-50 V, logic supply: 12-36 V
  • Output current: 8 A continuous, 20 A peak
  • TMLCAN & CANopen communication
  • Covered-frame with retractable connectors
  • Size: 89 x 77 x 17 mm (~3.50 x 3.03 x 0.67 in)
Amount: from 339.25 CHF
  • Fully digital servo drive with embedded motion controller
  • For brushless, DC brush, step & linear motors
  • Motor supply: 12-50 V, logic supply: 12-36 V
  • Output current: 8 A continuous, 20 A peak
  • EtherCAT communication
  • Covered-frame with retractable connectors
  • Size: 103 x 71 x 17 mm (~ 4.06 x 2.8 x 0.67 in)
Amount: from 339.25 CHF
Copyright MAXXmarketing Webdesigner GmbH
   

 

TECHNOSOFT SA, av. des Alpes 20, CH-2000 Neuchâtel, Switzerland. 
Website developed by Adsoft Solutions.