Closed-frame Intelligent Servo Drives

Fully digital high-precision servo drives with embedded intelligence and a built-in power amplifier. Used to control brushless DC, brushless AC (vector control), DC brush, linear or 2/3-phase stepping motors, these high-performance intelligent servo drives combine motion controller, power amplifier and PLC functionality in a single, compact unit. The on-board CAN-bus interface allows this type of drive to be used as an intelligent axis in a distributed-intelligence, multiple-axis network (up to 256 axes).

The closed-frame family of Technosoft intelligent closed-frame drives (IDM680, IBL2401, IBL2403, IBL3605, IDM240, IDM640, IDM680 and IDM3000) is specially developed for high-precision motion control applications.

  • Digital servo amplifier w. embedded motion controller
  • Suitable for AC brushless, DC brushless, DC brush, linear and stepping motors
  • Supply voltage: 12-48 V for logic; 12-80 V for motor
  • Output current: 8 A continuous; 16.5 A peak
  • CANopen communication interfaces
  • Compact covered-frame design (136 x 84.5 x 26) mm
Amount: from 184.00 CHF
  • Digital servo amplifier w. embedded motion controller
  • Suitable for AC brushless, DC brushless, DC brush, linear and stepping motors
  • Single power supply for logic and motor (6-24 V)
  • Output current: 1 A continuous; 3.6 A peak
  • CAN / CANopen / RS-232 communication interfaces
  • Compact covered-frame design (60 x 44 x 16 mm)
Amount: from 278.07 CHF
  • For brushless, DC brush and stepper
  • 12-24 V logic and motor power supply
  • 3 A continuous, 6 A peak current
  • Digital inputs / outputs; analog inputs
  • Quadrature encoder, Hall / linear Halls
  • RS-232 and CAN / CANopen
Amount: from 339.25 CHF
  • For brushless, DC brush and stepper
  • 12-36 V logic and motor power supply
  • 5 A continuous, 16 A peak current
  • Digital inputs / outputs; analog inputs
  • Quadrature encoder, Hall / linear Halls
  • RS-232 and CAN / CANopen
Amount: from 339.25 CHF
  • For brushless, DC brush and stepper
  • 12-48 V logic, 48-80 V motor power supply
  • 5 A / 8 A continuous, 16 A peak current
  • 7 digital inputs / 6 outputs; 2 analog inputs
  • High resolution to 256 microsteps / full step
  • Quadrature encoder, Hall
  • RS-232 or RS-485 and CAN
Amount: from 10.50 CHF
  • For brushless DC, brushless AC, DC brush and induction
  • 20-30 V logic, 160-325 V motor supply
  • 10 A continuous, 30 A peak current
  • 8 digital inputs / 6 outputs; 2 analog inputs)
  • Resolver, SSI and quad. encoder
  • Sin/cos encoder (optional)
  • RS-232 and CAN / CANopen
Amount: from 339.25 CHF
Copyright MAXXmarketing Webdesigner GmbH
   

 

TECHNOSOFT SA, av. des Alpes 20, CH-2000 Neuchâtel, Switzerland. 
Website developed by Adsoft Solutions.